Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Support Us

Top Posters

REQ: Solution to sporatic audio

I have sporatic audio at best after installing the latest debian distro. Is there a simple way to correct this?

Comments

  • ValtamValtam Registered
    Hi Rizo, can you please tell us a little more about your system, sound hardware, kernel, alsa/pulse version etc. Cheers.
  • RizoRizo Registered
    Valtam wrote:
    Hi Rizo, can you please tell us a little more about your system, sound hardware, kernel, alsa/pulse version etc. Cheers.

    I hope it's enough to give you the motherboard I have. I use the onboard audio for sound.

    http://www.gigabyte.com/products/product-page.aspx?pid=3302#ov
  • Unfortunately that's 1/5th of the question answered. The hardware doesn't help much without knowing the software running. Kernel version, alsa version and if pulse is installed, pulse version. ALSA configuration done, pulse configure done !
  • setkehsetkeh Administrator
    do you know what sound system you have installed (eg PulseAudio or Alsa) it seems to be an issue there as All the gigabyte drivers are in the kernel



    Wisdom:

    One does not Simply Deploy into Production.

  • Just on a side note, lspci, lsusb and dmesg will give us more information about the hardware than a link about it simply because then we know what's detected and what's not through the kernel...
  • RizoRizo Registered
    Armageddon wrote:
    Just on a side note, lspci, lsusb and dmesg will give us more information about the hardware than a link about it simply because then we know what's detected and what's not through the kernel...
    Valtam wrote:
    Hi Rizo, can you please tell us a little more about your system, sound hardware, kernel, alsa/pulse version etc. Cheers.
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=0d26a189-10ca-4671-9000-3fd400917a41 ro quiet splash vt.handoff=7
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   Centaur CentaurHauls
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
    [    0.000000]  BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI 2.4 present.
    [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA770-UD3/GA-MA770-UD3, BIOS F4 12/31/2008
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-FFFFF uncachable
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
    [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
    [    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
    [    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
    [    0.000000]   4 base 000100000000 mask FFFF00000000 write-back
    [    0.000000]   5 base 000200000000 mask FFFFE0000000 write-back
    [    0.000000]   6 base 000220000000 mask FFFFF0000000 write-back
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 0000000230000000 aka 8960M
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 256MB, type WB
    [    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
    [    0.000000] reg 4, base: 4GB, range: 4GB, type WB
    [    0.000000] reg 5, base: 8GB, range: 512MB, type WB
    [    0.000000] reg 6, base: 8704MB, range: 256MB, type WB
    [    0.000000] total RAM covered: 3327M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 256MB, type WB
    [    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
    [    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [ffff8800000f5620] f5620
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
    [    0.000000]  0000000000 - 00c0000000 page 1G
    [    0.000000]  00c0000000 - 00cfe00000 page 2M
    [    0.000000]  00cfe00000 - 00cfee0000 page 4k
    [    0.000000] kernel direct mapping tables up to cfee0000 @ 1fffd000-20000000
    [    0.000000] init_memory_mapping: 0000000100000000-0000000230000000
    [    0.000000]  0100000000 - 0200000000 page 1G
    [    0.000000]  0200000000 - 0230000000 page 2M
    [    0.000000] kernel direct mapping tables up to 230000000 @ cfede000-cfee0000
    [    0.000000] RAMDISK: 364e6000 - 3726b000
    [    0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: DSDT 00000000cfee30c0 05E2B (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
    [    0.000000] ACPI: FACS 00000000cfee0000 00040
    [    0.000000] ACPI: SSDT 00000000cfee8fc0 00544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
    [    0.000000] ACPI: HPET 00000000cfee9540 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
    [    0.000000] ACPI: MCFG 00000000cfee9580 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: APIC 00000000cfee8f00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] Scanning NUMA topology in Northbridge 24
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-0000000230000000
    [    0.000000] Initmem setup node 0 0000000000000000-0000000230000000
    [    0.000000]   NODE_DATA [000000022fffb000 - 000000022fffffff]
    [    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x00230000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000cfee0
    [    0.000000]     0: 0x00100000 -> 0x00230000
    [    0.000000] On node 0 totalpages: 2096751
    [    0.000000]   DMA zone: 64 pages used for memmap
    [    0.000000]   DMA zone: 5 pages reserved
    [    0.000000]   DMA zone: 3914 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 16320 pages used for memmap
    [    0.000000]   DMA32 zone: 831264 pages, LIFO batch:31
    [    0.000000]   Normal zone: 19456 pages used for memmap
    [    0.000000]   Normal zone: 1225728 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    [    0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    [    0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    [    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u524288
    [    0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060906
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=0d26a189-10ca-4671-9000-3fd400917a41 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Node 0: aperture @ c4000000 size 32 MB
    [    0.000000] Aperture pointing to e820 RAM. Ignoring.
    [    0.000000] Your BIOS doesn't leave a aperture memory hole
    [    0.000000] Please enable the IOMMU option in the BIOS setup
    [    0.000000] This costs you 64 MB of RAM
    [    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [    0.000000] Memory: 8094224k/9175040k available (6566k kernel code, 788036k absent, 292780k reserved, 6637k data, 920k init)
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:16640 nr_irqs:712 16
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 67108864 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2405.058 MHz processor.
    [    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.11 BogoMIPS (lpj=9620232)
    [    0.008009] pid_max: default: 32768 minimum: 301
    [    0.008034] Security Framework initialized
    [    0.008050] AppArmor: AppArmor initialized
    [    0.008051] Yama: becoming mindful.
    [    0.009217] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.014247] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.015737] Mount-cache hash table entries: 256
    [    0.015884] Initializing cgroup subsys cpuacct
    [    0.015890] Initializing cgroup subsys memory
    [    0.015899] Initializing cgroup subsys devices
    [    0.015901] Initializing cgroup subsys freezer
    [    0.015904] Initializing cgroup subsys blkio
    [    0.015911] Initializing cgroup subsys perf_event
    [    0.015942] tseg: 00cff00000
    [    0.015945] CPU: Physical Processor ID: 0
    [    0.015946] CPU: Processor Core ID: 0
    [    0.015949] mce: CPU supports 6 MCE banks
    [    0.015959] using AMD E400 aware idle routine
    [    0.017541] ACPI: Core revision 20110623
    [    0.020045] ftrace: allocating 27049 entries in 107 pages
    [    0.024664] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.066926] CPU0: AMD Phenom(tm) 9750 Quad-Core Processor stepping 03
    [    0.068003] Performance Events: AMD PMU driver.
    [    0.068003] ... version:                0
    [    0.068003] ... bit width:              48
    [    0.068003] ... generic registers:      4
    [    0.068003] ... value mask:             0000ffffffffffff
    [    0.068003] ... max period:             00007fffffffffff
    [    0.068003] ... fixed-purpose events:   0
    [    0.068003] ... event mask:             000000000000000f
    [    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.068003] Booting Node   0, Processors  #1
    [    0.068003] smpboot cpu 1: start_ip = 9a000
    [    0.156028] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156113]  #2
    [    0.156115] smpboot cpu 2: start_ip = 9a000
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248104]  #3 Ok.
    [    0.248105] smpboot cpu 3: start_ip = 9a000
    [    0.340038] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.340057] Brought up 4 CPUs
    [    0.340060] Total of 4 processors activated (19241.16 BogoMIPS).
    [    0.342536] devtmpfs: initialized
    [    0.344401] EVM: security.selinux
    [    0.344403] EVM: security.SMACK64
    [    0.344404] EVM: security.capability
    [    0.344429] PM: Registering ACPI NVS region at cfee0000 (12288 bytes)
    [    0.344931] print_constraints: dummy: 
    [    0.344960] RTC time: 20:37:22, date: 11/08/12
    [    0.344997] NET: Registered protocol family 16
    [    0.345110] node 0 link 0: io port [d000, ffff]
    [    0.345113] TOM: 00000000d0000000 aka 3328M
    [    0.345116] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
    [    0.345119] node 0 link 0: mmio [a0000, bffff]
    [    0.345122] node 0 link 0: mmio [d0000000, dfffffff]
    [    0.345124] node 0 link 0: mmio [f0000000, fe02ffff]
    [    0.345127] node 0 link 0: mmio [e0000000, e02fffff] ==> [e0100000, e02fffff]
    [    0.345130] TOM2: 0000000230000000 aka 8960M
    [    0.345132] bus: [00, 02] on node 0 link 0
    [    0.345134] bus: 00 index 0 [io  0x0000-0xffff]
    [    0.345136] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [    0.345138] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
    [    0.345140] bus: 00 index 3 [mem 0xe0300000-0xffffffff]
    [    0.345141] bus: 00 index 4 [mem 0xe0100000-0xe02fffff]
    [    0.345143] bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
    [    0.345153] Extended Config Space enabled on 1 nodes
    [    0.345025] Trying to unpack rootfs image as initramfs...
    [    0.345175] ACPI: bus type pci registered
    [    0.345235] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.345238] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [    0.367727] PCI: Using configuration type 1 for base access
    [    0.368694] bio: create slab <bio-0> at 0
    [    0.368694] ACPI: Added _OSI(Module Device)
    [    0.368694] ACPI: Added _OSI(Processor Device)
    [    0.368694] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.368694] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.368816] ACPI: EC: Look up EC in DSDT
    [    0.374891] ACPI: Interpreter enabled
    [    0.374899] ACPI: (supports S0 S3 S4 S5)
    [    0.374919] ACPI: Using IOAPIC for interrupt routing
    [    0.582181] ACPI: No dock devices found.
    [    0.582184] HEST: Table not found.
    [    0.582188] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.582240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.582346] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
    [    0.582348] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
    [    0.582351] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.582353] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [    0.582355] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [    0.582371] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [    0.582384] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [    0.582424] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [    0.582459] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [    0.582462] pci 0000:00:02.0: PME# disabled
    [    0.582499] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [    0.582518] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
    [    0.582528] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
    [    0.582538] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
    [    0.582547] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
    [    0.582557] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
    [    0.582567] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [    0.582588] pci 0000:00:11.0: set SATA to AHCI mode
    [    0.582636] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [    0.582650] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [    0.582716] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
    [    0.582730] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [    0.582803] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [    0.582822] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    [    0.582906] pci 0000:00:12.2: supports D1 D2
    [    0.582908] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.582912] pci 0000:00:12.2: PME# disabled
    [    0.582933] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [    0.582947] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [    0.583015] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
    [    0.583029] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    [    0.583101] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [    0.583120] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    [    0.583204] pci 0000:00:13.2: supports D1 D2
    [    0.583205] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.583209] pci 0000:00:13.2: PME# disabled
    [    0.583234] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [    0.583335] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [    0.583352] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
    [    0.583362] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
    [    0.583371] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
    [    0.583381] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
    [    0.583391] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
    [    0.583449] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [    0.583526] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [    0.583569] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [    0.583582] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    [    0.583651] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [    0.583671] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [    0.583684] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [    0.583698] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [    0.583715] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [    0.583767] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
    [    0.583777] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [    0.583788] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.583798] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [    0.583805] pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
    [    0.583813] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.588047] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [    0.588051] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
    [    0.588054] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
    [    0.588058] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.588092] pci 0000:02:06.0: [10ec:8169] type 0 class 0x000200
    [    0.588114] pci 0000:02:06.0: reg 10: [io  0xdc00-0xdcff]
    [    0.588127] pci 0000:02:06.0: reg 14: [mem 0xfdeff000-0xfdeff0ff]
    [    0.588180] pci 0000:02:06.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.588217] pci 0000:02:06.0: supports D1 D2
    [    0.588219] pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold
    [    0.588224] pci 0000:02:06.0: PME# disabled
    [    0.588244] pci 0000:02:07.0: [1102:0007] type 0 class 0x000401
    [    0.588266] pci 0000:02:07.0: reg 10: [io  0xdf00-0xdf1f]
    [    0.588361] pci 0000:02:07.0: supports D1 D2
    [    0.588392] pci 0000:02:0e.0: [104c:8024] type 0 class 0x000c00
    [    0.588414] pci 0000:02:0e.0: reg 10: [mem 0xfdefe000-0xfdefe7ff]
    [    0.588428] pci 0000:02:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
    [    0.588520] pci 0000:02:0e.0: supports D1 D2
    [    0.588522] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot
    [    0.588527] pci 0000:02:0e.0: PME# disabled
    [    0.588561] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
    [    0.588565] pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
    [    0.588569] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
    [    0.588574] pci 0000:00:14.4:   bridge window [mem 0xfdf00000-0xfdffffff pref]
    [    0.588576] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.588579] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.588581] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.588584] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [    0.588586] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [    0.588598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.588796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [    0.588849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [    0.588889]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.588892]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.588894] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.598656] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598697] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598733] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598769] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598875] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598909] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [    0.598999] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.598999] vgaarb: loaded
    [    0.598999] vgaarb: bridge control possible 0000:01:00.0
    [    0.598999] i2c-core: driver [aat2870] using legacy suspend method
    [    0.598999] i2c-core: driver [aat2870] using legacy resume method
    [    0.598999] SCSI subsystem initialized
    [    0.598999] libata version 3.00 loaded.
    [    0.598999] usbcore: registered new interface driver usbfs
    [    0.598999] usbcore: registered new interface driver hub
    [    0.598999] usbcore: registered new device driver usb
    [    0.598999] PCI: Using ACPI for IRQ routing
    [    0.608135] PCI: pci_cache_line_size set to 64 bytes
    [    0.608143] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [    0.608215] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
    [    0.608217] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff 
    [    0.608316] NetLabel: Initializing
    [    0.608318] NetLabel:  domain hash size = 128
    [    0.608319] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.608333] NetLabel:  unlabeled traffic allowed by default
    [    0.608350] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.608350] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [    0.610105] Switching to clocksource hpet
    [    0.610511] Freeing initrd memory: 13844k freed
    [    0.615379] AppArmor: AppArmor Filesystem Enabled
    [    0.615430] pnp: PnP ACPI init
    [    0.615455] ACPI: bus type pnp registered
    [    0.615595] pnp 00:00: [bus 00-ff]
    [    0.615598] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.615600] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.615602] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.615604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.615606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [    0.615608] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [    0.615694] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    0.615704] pnp 00:01: [io  0x0010-0x001f]
    [    0.615706] pnp 00:01: [io  0x0022-0x003f]
    [    0.615707] pnp 00:01: [io  0x0044-0x005f]
    [    0.615709] pnp 00:01: [io  0x0062-0x0063]
    [    0.615711] pnp 00:01: [io  0x0065-0x006f]
    [    0.615713] pnp 00:01: [io  0x0074-0x007f]
    [    0.615714] pnp 00:01: [io  0x0091-0x0093]
    [    0.615716] pnp 00:01: [io  0x00a2-0x00bf]
    [    0.615718] pnp 00:01: [io  0x00e0-0x00ef]
    [    0.615720] pnp 00:01: [io  0x04d0-0x04d1]
    [    0.615721] pnp 00:01: [io  0x0220-0x0225]
    [    0.615723] pnp 00:01: [io  0x0290-0x0294]
    [    0.615800] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    0.615803] system 00:01: [io  0x0220-0x0225] has been reserved
    [    0.615805] system 00:01: [io  0x0290-0x0294] has been reserved
    [    0.615808] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.708520] pnp 00:02: [io  0x4100-0x411f]
    [    0.708524] pnp 00:02: [io  0x0228-0x022f]
    [    0.708526] pnp 00:02: [io  0x0238-0x023f]
    [    0.708527] pnp 00:02: [io  0x040b]
    [    0.708529] pnp 00:02: [io  0x04d6]
    [    0.708530] pnp 00:02: [io  0x0c00-0x0c01]
    [    0.708532] pnp 00:02: [io  0x0c14]
    [    0.708533] pnp 00:02: [io  0x0c50-0x0c52]
    [    0.708535] pnp 00:02: [io  0x0c6c-0x0c6d]
    [    0.708536] pnp 00:02: [io  0x0c6f]
    [    0.708538] pnp 00:02: [io  0x0cd0-0x0cd1]
    [    0.708539] pnp 00:02: [io  0x0cd2-0x0cd3]
    [    0.708541] pnp 00:02: [io  0x0cd4-0x0cdf]
    [    0.708543] pnp 00:02: [io  0x4000-0x40fe]
    [    0.708544] pnp 00:02: [io  0x4210-0x4217]
    [    0.708546] pnp 00:02: [io  0x0b00-0x0b0f]
    [    0.708547] pnp 00:02: [io  0x0b10-0x0b1f]
    [    0.708549] pnp 00:02: [io  0x0b20-0x0b3f]
    [    0.708552] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [    0.708554] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [    0.708563] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.708598] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [    0.708603] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:06.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [    0.708673] system 00:02: [io  0x4100-0x411f] has been reserved
    [    0.708676] system 00:02: [io  0x0228-0x022f] has been reserved
    [    0.708679] system 00:02: [io  0x0238-0x023f] has been reserved
    [    0.708681] system 00:02: [io  0x040b] has been reserved
    [    0.708683] system 00:02: [io  0x04d6] has been reserved
    [    0.708685] system 00:02: [io  0x0c00-0x0c01] has been reserved
    [    0.708687] system 00:02: [io  0x0c14] has been reserved
    [    0.708689] system 00:02: [io  0x0c50-0x0c52] has been reserved
    [    0.708691] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
    [    0.708694] system 00:02: [io  0x0c6f] has been reserved
    [    0.708696] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
    [    0.708698] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
    [    0.708700] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
    [    0.708702] system 00:02: [io  0x4000-0x40fe] has been reserved
    [    0.708704] system 00:02: [io  0x4210-0x4217] has been reserved
    [    0.708706] system 00:02: [io  0x0b00-0x0b0f] has been reserved
    [    0.708708] system 00:02: [io  0x0b10-0x0b1f] has been reserved
    [    0.708711] system 00:02: [io  0x0b20-0x0b3f] has been reserved
    [    0.708713] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [    0.708718] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.708807] pnp 00:03: [dma 4]
    [    0.708808] pnp 00:03: [io  0x0000-0x000f]
    [    0.708810] pnp 00:03: [io  0x0080-0x0090]
    [    0.708812] pnp 00:03: [io  0x0094-0x009f]
    [    0.708813] pnp 00:03: [io  0x00c0-0x00df]
    [    0.708847] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.708876] pnp 00:04: [irq 0 disabled]
    [    0.708890] pnp 00:04: [irq 8]
    [    0.708892] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [    0.708920] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.708943] pnp 00:05: [io  0x0070-0x0073]
    [    0.708971] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.708977] pnp 00:06: [io  0x0061]
    [    0.709010] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.709017] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.709025] pnp 00:07: [irq 13]
    [    0.709057] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.709307] pnp 00:08: [io  0x03f8-0x03ff]
    [    0.709320] pnp 00:08: [irq 4]
    [    0.709377] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.709556] pnp 00:09: [io  0x0378-0x037f]
    [    0.709564] pnp 00:09: [irq 7]
    [    0.709620] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [    0.709703] pnp 00:0a: [io  0x0060]
    [    0.709705] pnp 00:0a: [io  0x0064]
    [    0.709713] pnp 00:0a: [irq 1]
    [    0.709754] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.709783] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [    0.709840] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.709843] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.709946] pnp 00:0c: [mem 0x000ce200-0x000cffff]
    [    0.709948] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [    0.709950] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [    0.709952] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [    0.709958] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
    [    0.709960] pnp 00:0c: [mem 0xffff0000-0xffffffff]
    [    0.709962] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [    0.709964] pnp 00:0c: [mem 0x00100000-0xcfedffff]
    [    0.709966] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [    0.709968] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [    0.709969] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
    [    0.709973] pnp 00:0c: disabling [mem 0x000ce200-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.709977] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.709980] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.709984] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.709987] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.709991] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    0.710053] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [    0.710055] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [    0.710058] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.710061] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [    0.710063] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [    0.710066] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.710084] pnp: PnP ACPI: found 13 devices
    [    0.710086] ACPI: ACPI bus type pnp unregistered
    [    0.717089] PCI: max bus depth: 1 pci_try_num: 2
    [    0.717112] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [    0.717115] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [    0.717118] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
    [    0.717121] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
    [    0.717124] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.717130] pci 0000:02:06.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
    [    0.717132] pci 0000:00:14.4: PCI bridge to [bus 02-02]
    [    0.717136] pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
    [    0.717141] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
    [    0.717145] pci 0000:00:14.4:   bridge window [mem 0xfdf00000-0xfdffffff pref]
    [    0.717173] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.717177] pci 0000:00:02.0: setting latency timer to 64
    [    0.717186] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.717188] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.717190] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.717192] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [    0.717195] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [    0.717197] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
    [    0.717199] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [    0.717202] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.717205] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
    [    0.717207] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [    0.717209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff pref]
    [    0.717212] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
    [    0.717214] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
    [    0.717216] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.717218] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
    [    0.717221] pci_bus 0000:02: resource 8 [mem 0xd0000000-0xfebfffff]
    [    0.717265] NET: Registered protocol family 2
    [    0.717559] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.719533] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.722763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.723151] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.723154] TCP reno registered
    [    0.723172] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.723242] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.723394] NET: Registered protocol family 1
    [    0.723441] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.808029] pci 0000:00:12.0: PCI INT A disabled
    [    0.808037] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.880028] pci 0000:00:12.1: PCI INT A disabled
    [    0.880044] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.880072] pci 0000:00:12.2: PCI INT B disabled
    [    0.880079] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.952030] pci 0000:00:13.0: PCI INT A disabled
    [    0.952037] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.024028] pci 0000:00:13.1: PCI INT A disabled
    [    1.024044] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    1.024068] pci 0000:00:13.2: PCI INT B disabled
    [    1.024084] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.096021] pci 0000:00:14.5: PCI INT C disabled
    [    1.096048] pci 0000:01:00.0: Boot video device
    [    1.096059] PCI: CLS 4 bytes, default 64
    [    1.097377] PCI-DMA: Disabling AGP.
    [    1.097477] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [    1.097479] PCI-DMA: using GART IOMMU.
    [    1.097482] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [    1.101201] IBS: LVT offset 1 assigned
    [    1.101226] perf: AMD IBS detected (0x00000007)
    [    1.101384] audit: initializing netlink socket (disabled)
    [    1.101405] type=2000 audit(1352407043.096:1): initialized
    [    1.148627] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    1.201400] VFS: Disk quotas dquot_6.5.2
    [    1.201459] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    1.201955] fuse init (API version 7.17)
    [    1.202045] msgmni has been set to 15964
    [    1.202530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    1.202570] io scheduler noop registered
    [    1.202572] io scheduler deadline registered
    [    1.202601] io scheduler cfq registered (default)
    [    1.202745] pcieport 0000:00:02.0: setting latency timer to 64
    [    1.202782] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [    1.202875] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    1.202899] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    1.203021] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    1.203027] ACPI: Power Button [PWRB]
    [    1.203073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    1.203081] ACPI: Power Button [PWRF]
    [    1.404854] ERST: Table is not found!
    [    1.404857] GHES: HEST is not enabled!
    [    1.404980] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    1.425471] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.536603] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.568328] Linux agpgart interface v0.103
    [    1.569848] brd: module loaded
    [    1.570648] loop: module loaded
    [    1.570858] ahci 0000:00:11.0: version 3.0
    [    1.570882] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    1.571005] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [    1.571009] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
    [    1.571635] scsi0 : ahci
    [    1.571728] scsi1 : ahci
    [    1.571799] scsi2 : ahci
    [    1.571867] scsi3 : ahci
    [    1.571973] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [    1.571976] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [    1.571979] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [    1.571982] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [    1.572177] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.572603] Fixed MDIO Bus: probed
    [    1.572620] tun: Universal TUN/TAP device driver, 1.6
    [    1.572621] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.572676] PPP generic driver version 2.4.2
    [    1.572775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.572830] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.572846] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    1.572908] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [    1.572917] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.572946] QUIRK: Enable AMD PLL fix
    [    1.572949] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
    [    1.572963] ehci_hcd 0000:00:12.2: debug port 1
    [    1.572991] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    [    1.584033] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    1.584160] hub 1-0:1.0: USB hub found
    [    1.584164] hub 1-0:1.0: 6 ports detected
    [    1.584292] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    1.584303] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    1.584346] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [    1.584353] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.584366] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
    [    1.584379] ehci_hcd 0000:00:13.2: debug port 1
    [    1.584403] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    [    1.600033] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    1.600130] hub 2-0:1.0: USB hub found
    [    1.600134] hub 2-0:1.0: 6 ports detected
    [    1.600218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.600268] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.600279] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    1.600321] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [    1.600350] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    [    1.660106] hub 3-0:1.0: USB hub found
    [    1.660112] hub 3-0:1.0: 3 ports detected
    [    1.660218] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.660229] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [    1.660270] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [    1.660284] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    [    1.720108] hub 4-0:1.0: USB hub found
    [    1.720113] hub 4-0:1.0: 3 ports detected
    [    1.720220] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.720231] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    1.720279] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [    1.720306] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    [    1.780109] hub 5-0:1.0: USB hub found
    [    1.780115] hub 5-0:1.0: 3 ports detected
    [    1.780220] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.780231] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [    1.780279] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [    1.780293] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    [    1.840120] hub 6-0:1.0: USB hub found
    [    1.840131] hub 6-0:1.0: 3 ports detected
    [    1.840238] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.840249] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [    1.840289] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [    1.840303] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    [    1.892128] ata1: SATA link down (SStatus 0 SControl 300)
    [    1.896039] usb 1-6: new high-speed USB device number 2 using ehci_hcd
    [    1.900122] hub 7-0:1.0: USB hub found
    [    1.900128] hub 7-0:1.0: 2 ports detected
    [    1.900192] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.900257] usbcore: registered new interface driver libusual
    [    1.900300] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.900302] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.900439] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.900527] mousedev: PS/2 mouse device common for all mice
    [    1.900673] rtc_cmos 00:05: RTC can wake from S4
    [    1.900783] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.900821] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [    1.900905] device-mapper: uevent: version 1.0.3
    [    1.900971] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    1.900980] cpuidle: using governor ladder
    [    1.900982] cpuidle: using governor menu
    [    1.900983] EFI Variables Facility v0.08 2004-May-17
    [    1.901192] TCP cubic registered
    [    1.901287] NET: Registered protocol family 10
    [    1.901722] NET: Registered protocol family 17
    [    1.901744] Registering the dns_resolver key type
    [    1.901880] PM: Hibernation image not present or could not be loaded.
    [    1.901891] registered taskstats version 1
    [    1.919946] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.933753]   Magic number: 4:335:649
    [    1.933763] scsi_host host3: hash matches
    [    1.933766] scsi host3: hash matches
    [    1.933820] processor LNXCPU:02: hash matches
    [    1.933863] rtc_cmos 00:05: setting system clock to 2012-11-08 20:37:24 UTC (1352407044)
    [    1.933880] powernow-k8: Found 1 AMD Phenom(tm) 9750 Quad-Core Processor (4 cpu cores) (version 2.20.00)
    [    1.933913] powernow-k8:    0 : pstate 0 (2400 MHz)
    [    1.933915] powernow-k8:    1 : pstate 1 (1200 MHz)
    [    1.934198] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.934199] EDD information not available.
    [    2.064031] ata4: softreset failed (device not ready)
    [    2.064034] ata4: applying PMP SRST workaround and retrying
    [    2.064050] ata2: softreset failed (device not ready)
    [    2.064054] ata2: applying PMP SRST workaround and retrying
    [    2.068033] ata3: softreset failed (device not ready)
    [    2.068036] ata3: applying PMP SRST workaround and retrying
    [    2.100030] Refined TSC clocksource calibration: 2405.121 MHz.
    [    2.100035] Switching to clocksource tsc
    [    2.236020] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.236822] ata4.00: HPA detected: current 488395055, native 488397168
    [    2.236905] ata4.00: ATA-8: WDC WD2500AAJS-00B4A0, 01.03A01, max UDMA/133
    [    2.236907] ata4.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    2.237878] ata4.00: configured for UDMA/133
    [    2.240028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.240047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    2.240643] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653N, 0208, max UDMA/33
    [    2.240774] ata3.00: HPA detected: current 976771055, native 976773168
    [    2.240845] ata3.00: ATA-8: WDC WD5000AACS-19G8B1, 05.04C05, max UDMA/133
    [    2.240848] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    2.241562] ata2.00: configured for UDMA/33
    [    2.241683] ata3.00: configured for UDMA/133
    [    2.242550] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  0208 PQ: 0 ANSI: 5
    [    2.244951] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    2.244954] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    2.245053] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    2.245113] sr 1:0:0:0: Attached scsi generic sg0 type 5
    [    2.245247] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AACS-1 05.0 PQ: 0 ANSI: 5
    [    2.245394] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    2.245402] sd 2:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
    [    2.245504] sd 2:0:0:0: [sda] Write Protect is off
    [    2.245507] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.245519] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5
    [    2.245544] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.245654] sd 3:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
    [    2.245702] sd 3:0:0:0: Attached scsi generic sg2 type 0
    [    2.245736] sd 3:0:0:0: [sdb] Write Protect is off
    [    2.245739] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    2.245775] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.253268]  sdb: sdb1
    [    2.253507] sd 3:0:0:0: [sdb] Attached SCSI disk
    [    2.280641]  sda: sda1
    [    2.280850] sd 2:0:0:0: [sda] Attached SCSI disk
    [    2.282276] Freeing unused kernel memory: 920k freed
    [    2.282559] Write protecting the kernel read-only data: 12288k
    [    2.287701] Freeing unused kernel memory: 1608k freed
    [    2.292038] Freeing unused kernel memory: 1196k freed
    [    2.309576] udevd[133]: starting version 175
    [    2.348811] scsi4 : pata_atiixp
    [    2.349409] scsi5 : pata_atiixp
    [    2.349946] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [    2.349949] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [    2.352540] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    2.352576] r8169 0000:02:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.352601] r8169 0000:02:06.0: (unregistered net_device): not PCI Express
    [    2.353008] r8169 0000:02:06.0: eth0: RTL8169sb/8110sb at 0xffffc90000c72000, 00:14:d1:17:ff:00, XID 10000000 IRQ 20
    [    2.353011] r8169 0000:02:06.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
    [    2.532600] ata6.01: HPA detected: current 1953523055, native 1953525168
    [    2.532608] ata6.01: ATA-8: Hitachi HDS721010CLA332, JP4OA25C, max UDMA/133
    [    2.532611] ata6.01: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    2.548546] ata6.01: configured for UDMA/100
    [    2.548680] scsi 5:0:1:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
    [    2.548854] sd 5:0:1:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.548904] sd 5:0:1:0: Attached scsi generic sg3 type 0
    [    2.548956] sd 5:0:1:0: [sdc] Write Protect is off
    [    2.548962] sd 5:0:1:0: [sdc] Mode Sense: 00 3a 00 00
    [    2.548998] sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.576213]  sdc: sdc1 sdc2
    [    2.576523] sd 5:0:1:0: [sdc] Attached SCSI disk
    [    2.577924] firewire_ohci 0000:02:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    2.632076] firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [    2.640020] usb 6-2: new low-speed USB device number 2 using ohci_hcd
    [    2.817342] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3
    [    2.817484] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.1-2/input0
    [    2.817507] usbcore: registered new interface driver usbhid
    [    2.817508] usbhid: USB HID core driver
    [    2.940318] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [    3.072022] usb 6-3: new full-speed USB device number 3 using ohci_hcd
    [    3.132119] firewire_core: created device fw0: GUID 004181b30000241d, S400
    [   15.622406] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   15.662985] udevd[405]: starting version 175
    [   15.663218] Adding 975868k swap on /dev/sdc1.  Priority:-1 extents:1 across:975868k 
    [   15.707308] lp: driver loaded but no devices found
    [   15.710548] wmi: Mapper loaded
    [   15.725921] parport_pc 00:09: reported by Plug and Play ACPI
    [   15.725982] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [   15.737618] nvidia: module license 'NVIDIA' taints kernel.
    [   15.737622] Disabling lock debugging due to kernel taint
    [   15.751283] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
    [   15.751289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   15.751889] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [   15.752085] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [   15.770408] MCE: In-kernel MCE decoding enabled.
    [   15.771028] EDAC MC: Ver: 2.1.0
    [   15.772858] AMD64 EDAC driver v3.4.0
    [   15.775830] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7A04
    [   15.775891] usbcore: registered new interface driver usblp
    [   15.779947] EDAC amd64: DRAM ECC disabled.
    [   15.779959] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [   15.779960]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [   15.779962]  (Note that use of the override may cause unknown side effects.)
    [   15.792870] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
    [   15.812220] lp0: using parport0 (interrupt-driven).
    [   15.825851] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [   15.825863] nvidia 0000:01:00.0: setting latency timer to 64
    [   15.825869] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [   15.826553] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.40  Thu Apr  5 21:37:00 PDT 2012
    [   15.873537] ppdev: user-space parallel port driver
    [   15.881237] snd_ca0106 0000:02:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [   15.881274] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
    [   16.392992] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
    [   16.511398] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [   16.511402] vesafb: scrolling: redraw
    [   16.511405] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [   16.513601] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011d00000, using 1216k, total 1216k
    [   16.513803] Console: switching to colour frame buffer device 80x30
    [   16.513815] fb0: VESA VGA frame buffer device
    [   16.805365] init: failsafe main process (789) killed by TERM signal
    [   16.831553] Bluetooth: Core ver 2.16
    [   16.831579] NET: Registered protocol family 31
    [   16.831581] Bluetooth: HCI device and connection manager initialized
    [   16.831584] Bluetooth: HCI socket layer initialized
    [   16.831586] Bluetooth: L2CAP socket layer initialized
    [   16.831592] Bluetooth: SCO socket layer initialized
    [   16.834704] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   16.834708] Bluetooth: BNEP filters: protocol multicast
    [   16.835491] Bluetooth: RFCOMM TTY layer initialized
    [   16.835500] Bluetooth: RFCOMM socket layer initialized
    [   16.835502] Bluetooth: RFCOMM ver 1.11
    [   16.903660] r8169 0000:02:06.0: eth0: link down
    [   16.903675] r8169 0000:02:06.0: eth0: link down
    [   16.904680] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.904965] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   19.130293] r8169 0000:02:06.0: eth0: link up
    [   19.268600] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   20.553537] usblp0: removed
    [   20.559839] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7A04
    [   30.144014] eth0: no IPv6 routers present
    
  • setkehsetkeh Administrator
    Rizo I merged your post as you pasted the out put of the commands twice and put the output of your commands in
    
    tags to make the post easyer to read :)                        



    Wisdom:

    One does not Simply Deploy into Production.

  • ValtamValtam Registered
    Are you running a soundblaster soundcard?
    Can you please paste the output of: lspci
  • RizoRizo Registered
    Valtam wrote:
    Are you running a soundblaster soundcard?
    Can you please paste the output of: lspci


    00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A)
    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a)
    00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
    00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1)
    02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
    02:07.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
    02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
  • ValtamValtam Registered
    Have a look here https://bbs.archlinux.org/viewtopic.php?id=95197 notably post #4 in regards to that soundcard.
Sign In or Register to comment.